| |
| Author |
Message |
okletgo
Age: 43
Joined: 21 Mar 2011
Posts: 59
|
|
The release of Canon EOS 7D seems to wrestle back the king of APS-C crown. At the same time, HD videos recorded by Canon 7D is also perfect for capturing clips or sequences which allows to film with optional resolutions (1920*1080 pixels, 29.97, 25, 23.976fps; 1280*720 pixels, 59.94, 50 fps, or 640*480 pixels, 59.94, 50 fps). The Canon 7D records its movies as MOV files using AVC / H.264 compression, which is much more conservative of memory card space than the Motion JPEG format used by some cameras, and avoids some of the severe image quality loss suffered by AVCHD cameras when faced with significant amounts of change in image content between frames.
However, the video capture format MOV files produced by Canon EOS 7D Mark II are a long GOP format that is highly compressed, so it is not a good playing and editing format. Some MOV video player and editing software can not handle these MOV files. AVC/H.264 is the codec used to record these files, which keep sizes low, but sucks for editing. A format conversion of Canon 7D’s MOV to FCE 4.0 compatible format may be a wise choice because H.264 is notorious for crashing and locking up FCE 4.0 often.
You may need Brorsoft EOS MOV Converter for Mac which can convert Canon 7D H.264 MOV to a standard editing format for FCE 4.0. The following passage is the detail guide about how to convert Canon 7D H.264 MOV footages to QuickTime for FCE 4.0.
Preparation: Connect Canon EOS 7D to iMac/Mac Book with a USB cable or plug your Compact Flash memory card to a card reader to import the H.264 MOV file.
Step 1: Upload Canon 7D H.264 MOV footage to Brorsoft Video Converter
Run Brorsoft Video Converter for Mac as the most outstanding H.264 MOV Converter Mac. Find the "Add" button on the up-left corner, by clicking it or dragging the video directly you can import H.264 MOV files shot by Canon 7D to the program.
Step 2: Choose the QuickTime MOV as the output format
In the format optional list, you can find “MOV-QuickTime (*mov)” option in the “Common Video ” section and choose it. Then, click “Output” to set the routine where the output QuickTime file folder is.
Step3: Confirm the codec as XVID Codec that FCE 4.0 deals with
Click the “settings” button to confirm if the output video codec is XVID. If not, change it from H.264 to XVID and save it after renaming. Click”Ok” to finish your output settings.
Step 4: Finish converting Canon 7D H.264 MOV footage to QuickTime
Click the “Convert” button under the preview window, and the Mac Canon Video converter will start converting Canon 7D H.264 MOV footage to QuickTime for you. The output QuickTime video is ready for you to edit on FCE 4.0.
As long as you choose the all-in-one Brorsoft Video Converter for Mac with these simple steps, you can easily convert Canon 7D’ H.264 MOV video files to FCE 4.0 compatible format.
Tip: When working with video cameras that record to a memory card, you will use a process called logging and transferring to get the footage into Final Cut Express. Logging and transferring is the process of extracting the footage into an editable format. Most video cameras record video into a compress format like H.264 or AVCHD, which is difficult or impossible to edit natively.
|
|
|
|
|
|
  |
    |
|
okletgo
Age: 43
Joined: 21 Mar 2011
Posts: 59
|
|
Canon EOS 5D Mark II DSLR Camera: Released in September, 2008 in Sydney is the clear choice for digital SLR photography enthusiast. The HD video footage that comes out the EOS 5D Mark II is quite amazing. It produces stunning images that blow many much more expensive cameras away. But it has some limitations. For instance, it shoots 1080p at 30fps. It is really a pity that Canon did not design it to shoot at 25fps, for Europe's PAL. Anyway, as some users in Europe, They need to convert the Canon 5D Mark II footage from 30fps to 25fps. In addition, The EOS 5D Mark II records videos in QuickTime MOV. Unfortunately, the version of QuickTime it uses is H.264-As this is a finishing format rather than a format that can easily be edited.
So, if you have the same problem to know what would be the best way of doing 30fps to 25fps conversion without losing any qualities, and if you are still seeking for the software to convert H.264 MOV to the right format that editing software likes, the most professional Mac video converter,Brorsoft EOS MOV Converter for Mac can solve both problems.
The following article will tell you how to convert Canon 5D Mark II footage from 30fps to 25fps:
Preparation: Connect Canon 5D Mark II footage to iMac/Mac Book with a USB cable or plug your CF memory card to a card reader. Import the Canon 5D Mark II footage to hard drive.
Step 1: Load Canon 5D Mark II footage to Brorsoft EOS 5D Converter for Mac
Open Brorsoft Video Converter for Mac and in the window you can easily find "Add" button on the up-left corner. Either by clicking the icon or by dragging your video file directly can you add the video shot by Canon 7D to the Brorsoft Video Converter.
Step 2: Choose the QuickTime MOV as the output format
In the format optional list, you should move your mouse cursor to “MOV-QuickTime (*mov)” option in the “Common Video ” section and click it. What follows is to click “Output” to set the destination routine where the output file generates.
Step3: Set the video frame rate from 30fps to 25fps and select XVID Codec
Open the profile by clicking the “settings” button. In this window you can find parameter settings for both video and audio. You need to click the “frame rate(fps)” option in the video box and change the parameter from 30fps to 25 fps. What’s more, if you are in need of further handling in editing software, change the H.264 codec to XVID Codec in the same box. Click “Save as” to preserve all the above settings after renaming and click “Ok” to finish.
Step 4: Start Canon 5D Mark II footage conversion from 30fps to 25fps
Click the “Convert” button under the preview window, and the Mac Canon Video converter will start converting Canon 5D Mark II footage from 30fps to 25fps. Finally, the output 25fps video is ready for you.
Tip: The two most common video standards used are NTSC and PAL. PAL (Phase Alternating Line), is the predominant video system or standard mostly used overseas. In PAL, 25 frames are transmitted each second. Each frame is made up of 625 individual scan lines. NTSC (National Television System Committee) is the video system or standard used in North America and most of South America. In NTSC, 30 frames are transmitted each second. Each frame is made up of 525 individual scan lines.
For more information please refer to: Convert/Pull Canon EOS 5D Mark II footage from 30fps to 25fps
|
|
|
|
|
|
| |
|
|
okletgo
Age: 43
Joined: 21 Mar 2011
Posts: 59
|
|
Since Canon launched EOS 600D/Rebel T3i in February, 2011. The Digital SLRs are flying from shelves everywhere. Now, let’s go for it with a further acquaintance about its second feature. Canon EOS 600D shoots Full-HD video with manual control of frame rate, exposure and sound. The videos are recorded in MOV with H.264 as video codec and Linear PCM as audible codec. The movie frame rate is 29.97fps at max quality with the maximum movie resolution, 1920*1080.
As mentioned above, EOS 600D’s codec H.264 is a “delivery” codec-designed for viewing rather than editing. It is certain that you have been aware with this point too. Hence, if you are still seeking for the software which can edit the EOS 600 H.264 MOV footage directly, or if you are still confused to choose the right software which can convert H.264 MOV footage to editing software friendly codec, Brorsoft Video Converter will help you get rid of such problems. It not only functions as a converter, but also performs as a H.264 MOV editor. Now, take trimming for instance, in the following article, I will show you how to edit Canon EOS 600D/Rebel T3i H.264 footage for trimming.
Preparation: Connect Canon EOS 600D to iMac/Mac Book with a USB cable or insert SD memory card to a card reader to import the H.264 MOV file to hard drive .
Step 1: Upload EOS 600D H.264 MOV footage to the program
Run the Brorsoft Video Converter program as the most comprehensive and professional H.264 1080p MOV converter and editor. Find the "Add" button on the up-left corner, by clicking it or dragging the video directly you can easily import H.264 MOV footage.
Step 2: Choose MPEG-2 as the output format
Click the “Format” button, and move your mouse cursor to the drop-down list for choosing a output format. We recommend the “MPEG-2 (*.mov)” in the “Adobe Premiere/Sony Vegas” section as an editing software friendly format. Then, click the “Output” button to specify your output destination folder below.
Step 3: Edit EOS 600D H.264 MOV footage for trimming
To start with, click the “Editor” button. In the new window, the H.264 MOV editorgenerates Original Preview and Output Preview for you. Then, find the “trim” tab, in the timeline, set the start time point and the end time point in the "start" and "end" boxes. And, finally click the “Ok” button to finish editing. You can also change your new clip length by clicking “Reset” button.
Step 4: Convert EOS 600D H.264 MOV footage with trimming
Click the big round “Convert” button to start conversion. The output file is the new video clip you want after trimming.
The combination of converting and editing function enables the Brorsoft Video Converter program more competitive. More options for editing like cropping, watermarking, effect filtering etc are available according to your individual needs.
Tip: You’d better confirm the settings during editing EOS 600D MOV footage because the resolution 1920*1080 with 30 fps frame rate is favorable. After setting these parameters, you can keep the original HD resolution and 16:9 aspect ratio.
|
|
|
|
|
|
| |
|
|
robinhan
Joined: 20 Mar 2011
Posts: 883
|
|
Convert DVD to PlayBook Mac - How to convert DVD movies to PlayBook on Mac?
The BlackBerry PlayBook is a tablet computer announced by Research In Motion (RIM). It has a a 1024×600 WSVGA, 7-inch display and 3D graphics acceleration, as well as HDMI-out. The BlackBerry PlayBook supports high resolution video playback (H.264, MPEG4, WMV), and audio (MP3, AAC 5.1, WMA 5.1 audio playback) formats.
So you can use it to enjoy your videos, movies, but how to play DVD movies on PlayBook. Now, if you want to watch DVD movies on PlayBook, you should convert DVD to PlayBook supports video format like above metioned H.24, WMV, MPEG4, etc.
Mac DVD to PlayBook Converter is an ideal DVD ripping software to help you convert DVD to PlayBook on Mac. You can use it to convert DVD to WMV so that you can import DVD movies into PlayBook on Mac.
Now follow the steps, you could convert DVD to PlayBook on Mac.
Step 1. Add DVD file
Install and run Mac DVD to PlayBook Converter, then load the DVD movie from your Mac or DVD Driver, click "Open DVD" to load the DVD movies you want to convert.
Step 2. Output settings
You can select the ".wmv" as the output format from the "Profile" drop-down list, and then set the file saving destination on your Mac.
Step 3. Convert DVD to PlayBook on Mac
If you want to make your video different, you can video resolution, video frame rate, video bit rate, audio bit rate, audio sample rate and so on. All things are ready, click "Convert" button to convert DVD to PlayBook on Mac.
|
|
|
|
|
|
| |
|
|
ioslover
Joined: 07 Jun 2011
Posts: 2170
|
|
|
If Apple can sue Samsung, then Palm and Microsoft should sue Apple. They had the first touchscreen phones, particularly ones without keyboards. For example, The HTC Touch (Vogue) came out before the original iPhone. It's sleep button, volume rocker, and action button were all in the same place as that of the iPhone. Also, Palm had a screen full of app icons almost a decade before the iPhone. Apple is being ridiculous. 187 Million iOS devices to 6 million-ish Galaxy devices. What more do they want. backup blu-ray Well it is not uncommon for apple to have the activation servers off line for a weekend to do some updates usually it proceeds a large slam on the servers like iOS 5 would cause. If that is the case apple support advisors would have fore knowledge of the servers going off line.
|
|
|
|
|
|
| |
|
|
ivy00135
Joined: 06 Nov 2012
Posts: 49808
|
|
| |
|
|
|
|
|
View next topic
View previous topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum
|
|
|
|
