TomJason
Age: 37
Joined: 30 Oct 2011
Posts: 76
Location: USA
|
|
40% OFF Mac HD Video Converter-Convert AVCHD to ProRes for FCP editing on Mac
Transcode AVCHD MTS/M2TS footage to ProRes 422 for FCP on Mac
40% OFF? Yes! It is Pavtube's Daily Special Offer for Christmas Holiday! you can get 40% OFF HD Video Converter (window/mac)! Only Two Day! From Dec 19th to Dec 20th!
What is the best solution for editing AVCHD footage in Final Cut Pro? This is a frequently asked question by FCP users. AVCHD is an HD video format jointly developed by Sony and Panasonic that uses Advanced Video Coding (AVC) compression (also known as MPEG-4 part 10 or H.264) to achieve high-quality images and low data rates. Generally speaking, AVCHD footage is usually saved in MTS or M2TS container format, which are widely used by Sony, Panasonic, JVC, Canon camcorders. However, AVCHD files are not natively supported by Final Cut Pro and must be transcoded to FCP friendly codecs such as QuickTime movie and Apple Intermediate Codec before importing to FCP. To lower the quality loss during transcoding, Apple introduced in 2008 the Apple ProRes family to help Final Cut Pro works more efficiently with HD contents. By transcoding/converting AVCHD to Apple ProRes codec, the possible best quality is retained in post-production workflow and you can then edit the resulting media files just as you would edit in QuickTime Movie format. Besides, the rendering time is saved as Apple ProRes codecs are natively supported by FCP. The following guide tells you how to convert AVCHD to Apple ProRes 422 codec for use in your Final Cut Pro sequence.
Required software: Pavtube MTS/M2TS Converter for Mac or Pavtube HD Video Converter for Mac - 40% OFF! Only Two Day! From Dec. 19th - Dec. 20th !
About the software: This is an AVCHD transcoding tool for Mac OS X only. The Mac HD Video Converter deals with AVCHD footage straightly from Sony, Panasonic, JVC and various other camcorders and exports HD contents encoded in various codecs for editing and playing back. The FCP friendly codecs includes Apple ProRes family (ProRes 422, ProRes 422 LT, ProRes 422 HQ, ProRes 422 Proxy, ProRes 4444), DVCPRO, HDV, Apple Intermediate codec, etc.
Software availability: The Mac AVCHD Converter is offered by Pavtube Studio for $29 only, and is free of update. You may download a trial of the HD Video Converter for Mac software to try it out. Notice that the trial version puts a Pavtube logo on the screen.
Detailed guide of converting AVCHD/MTS/M2TS to Apple ProRes 422 codec for Final Cut Pro:
Step 1. Run Pavtube HD Video Converter for Mac. Click "Add" button and browse to the AVCHD footages either from scratch disk or cam HDD for loading to the converter.
Step 2. Click on "Format" bar and set a FCP friendly format in dropdown-list. You are advised to "Follow Final Cut Pro" template and "Apple ProRes 422 (*.mov)" format. AVCHD has a much higher compression ratio than Apple ProRes, so the ingested files are significantly larger than the original files. For example, a 2-minute native AVCHD file is about 200–300 MB. After transcoding to the Apple ProRes 422 codec, the file size can be as large as 2 GB. If you prefer smaller file size, choose "Apple ProRes 422 (LT) (*.mov)" instead. The "Apple ProRes 422 (Proxy) (*.mov)" format offers file size at SD levels and is recommended for 480i/p and 576i/p shootings.
Step 3. Click the "Settings" button and customize proper video/ audio parameters if necessary. Video size, bitrate and fame rate are flexible and can be adjusted as you like. E.g. Set video size to 1920*1080 when you feel like to keep 1080p as the source file features. Or set smaller bitrate to further cut down export file size. You may skip this step as well.
Step 4. Click "Browse" button to set a location on your HDD for the output video file. As I mentioned above, the generated file size could be huge, so make sure there are enough disk space.
Step 5. Click "Convert" to start transcode AVCHD/MTS/M2TS to Apple ProRes 422 codec. The conversion process may take long time due to huge file size but trust me-- this Mac MTS/M2TS Converter is faster than most other AVCHD transcoding tool. And it will not bother to render the converted files in FCP. After conversion just click the "Open" button to locate converted video files for FCP post-production seamlessly.
Additional Tips and Tricks for the Mac AVCHD MTS/M2TS Converter app:
1. Thumbnail- click "Snapshoot" button when previewing the video. Click "Option" to set the image format of screenshots.
2. Deinterlace- click "Editor", switch to "Effect" tab, find "Deinterlacing" box, and check it to eliminate interlacing lines.
3. Combine files together- check the files to be merged in file list and check "Merge into one" box beside "Settings" button.
4. Trim a section of the movie- click "Editor", switch to "Trim" tab, and input time point in start and end box.
5. Auto shutdown- click "Option" menu and check "Shut down the computer after conversion" before conversion starts.
Related software recommends:
Pavtube HD Video Converter for Mac, which supports AVCHD conversion as well as various other source media like MOV, AVI, MXF, AVI, MP4, WMV, TS, TiVo, etc and exports HD video with Apple ProRes 422 codec for Final Cut Pro.
Pavtube iMedia Converter for Mac, which converts AVCHD videos, common videos, DVD, and Blu-ray Disc to Apple ProRes 422 codec for Final Cut Pro and to MP4, MOV, M4V videos for QuickTime player, iTunes, iPad, iPhone, iPod, etc.
|
|
|
|
|
|
