 |
|
 |
| |
| Author |
Message |
Thomascheng
Age: 37
Joined: 17 Feb 2012
Posts: 91
|
|
Taylormade said the feel and sound of TaylorMade R11 Irons should be softer than the previous Burner 2.0, and r 11 driver of the clubface hitting area and close to the pole end part is slightly thickened. They are disciples of both the Burner 2.0 and Tour Preferred irons. A light and lively face combines with “inverted cone technology” to deliver more consistent ball speeds and forgiveness on mis-hits. At impact, the irons feels and sounds more muted (quieter) than the loud-ish TaylorMade Burner 2.0 Irons . The fixed (red) plugs—2.5 to 17 grams—are made of aluminum, steel or tungsten and can not be adjusted by consumers. Because the ridge gradually wider, so that the center of gravity more rearward, the higher the fault tolerance.
In addition, the tests show that: the distance of 4-iron of TaylorMade R11 Driver and Burner 2.0 is almost the same; r11, distance of 6-iron is one yard shorter than the Burner 2.0. The taylormade r11’s short irons have a shallow undercut channel between the face and rear to control feel and CG location, the mid-irons have a moderate undercut, and the long irons have a progressively larger undercut that pulls weight farther back from the face for added forgiveness. The ball speed and flight distance of r11 in no way inferior to the Burner 2.0. The distance between each hardcore poor is about 15 yards.
|
|
|
|
|
|
  |
    |
|
wts30286
Joined: 06 Nov 2012
Posts: 45130
|
|
| |
|
|
|
|
|
View next topic
View previous topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum
|
|
|
|
 |
|
 |
|
