AT&T Carrier - How to put Blu-ray movies to iPad at fast speed? tutubebe99 - Mon Jan 17, 2011 7:02 pm Post subject: How to put Blu-ray movies to iPad at fast speed?
How to put Blu-ray movies to iPad at fast speed?
Is there any way to shorten the Blu-ray rippingtime? Yes. Here I’d share with you some tricks for ripping Blu-ray at faster speed. If your PC is equipped with an NVIDIA CUDA ready graphics card, then the NVIDIA CUDA enabled Graphics card can be taken advantages to fast convert Blu-ray to iPad and other devices that accept H.264 codec. By processing video conversions on NVIDIA's GPU instead of your computer's CPU, Blu-ray ripping time can greatly shorted and more CPU resources can be spared for other applications, making your computer run much smoother. I tested the ripping time when ripping Blu-ray to iPad with and without CUDA enabled, and found the BD ripping speed can be 3-4 times faster when CUDA is utilized. You may download trial of Pavtube Blu-ray Ripper software v3.7 and experience faster speed for ripping Blu-ray to iPad as it shows below:
Step 1: Run Pavtube Blu-ray to iPad Converter, and load BD files to it
Click “BD/DVD ROM” or “BD/DVD Folder” to load Blu-ray movie files into the app. When movie is loaded, check if the CUDA button is activated. By default the software turns CUDA on when an NVIDIA CUDA ready graphics card is installed.
Step 2: Select an iPad compatible format as output format
Click the pull down menu at the opposite side of “Format”, and then tap “iPad” profile. There are formats specially designed for iPad, select “iPad HD Video (*.mp4)” or “iPad Video H.264 (*.mp4)” to take advantage of CUDA acceleration.
Step 3: Click "Convert" button to fast rip Blu-ray/DVD for iPad playback
As long as the ripping work is finished, you can click "Open" button to get the output files. What you need to do next is just syncing the files to your iPad with iTunes. Start your HD movie-watching experience now.
A comparison of BD to iPad ripping speed with and without CUDA implementation
Source Media: Blu-ray Disc Toy Story 3, movie length 1hr and 43mins
Software Tool: Pavtube Blu-ray Ripper v3.7.1.2290 trial version
Output Format: iPad Video (*.mp4) format, default settings
When CUDA Enabled: It costs 43mins to generate iPad optimized MP4 file of 2.95GB
When CUDA Disabled: It costs 148mins to generate iPad optimized MP4 file of 2.97GB
Conclusion: Blu-ray ripping speed is 3.44 times faster with CUDA enabled than that CUDA is disabled.
Blu-ray ripping: why it takes so long?
By ripping Blu-ray to 1080p HD video clips, the Blu-ray movies can be played back freely over PC HD media players and Video DVD players as well, and are no longer restricted to play in applicable Blu-ray player only. Many movie lovers find it takes long time to rip a Blu-ray Disc to PC, especially when they choose 1080p MKV/MP4/AVI/WMV as export format. If you have a PC/laptop with Intel CORE i5/i7 processor with 6GB of RAM or above and run an effective Blu-ray ripping/converting tool exclusively, the Blu-ray ripping process could takes around an hour. Generally speaking, Blu-ray ripping process can cost 2-8 hours when working on a slower/regular PC. The higher quality you get, the longer it takes.
Time-saving solutions for ripping Blu-ray Disc to Windows 7
Is there any way to shorten the Blu-ray ripping time? Yes. Here I’d share with you some tricks for ripping Blu-ray at faster speed.
A. Rip Blu-ray to M2TS streams without en-decoding.
This is an easiest and fastest way for backing up full Blu-ray data, as it copies high-def Blu-ray M2TS to your hard drive straightly without en-decoding process. The good thing is you’ll get Blu-ray clips in the way they are made into BD, so there will not be any quality loss. All you need is Blu-ray decrypting software like Pavtube Blu-ray Disc Ripper v3.7, and the whole process takes 40min to 1 hour only on a regular PC. But there are few portable media players play M2TS streams without a hitch, so make sure your media player or PC meet the Blu-ray playing specifications first. VLC Player software is recommended for playing M2TS on PC. Learn how to copy Blu-ray Disc to lossless M2TS streams.
By processing video conversions on NVIDIA's GPU instead of your computer's CPU, Blu-ray ripping time can greatly shorted and more CPU resources can be spared for other applications, making your computer run much smoother. For instance, recently released Pavtube Blu-ray Disc Ripper v3.7, which is accelerated by CUDA (NVIDIA GeForce GTS 240), takes 90min only to rip Blu-ray Avatar to 1080p H.264 MP4 file (output size- 10GB), comparing with 270min when ripping with its previous version Pavtube Blu-ray Disc Ripper v3.6. The ripping speed can be faster when/if the GeForce GTS 240 is replaced with a more powerful CUDA enabled Graphics card. This way works only when there is an NVIDIA’s CUDA enabled Graphics card and you rip Blu-ray into H.264 encoded formats (H.264 MKV, MP4, MOV, TS, etc). Learnhow to gear up Blu-ray ripping speed with CUDA.
C. Make a concession in video quality to shorten Blu-ray ripping time.
If you do not mind losing some quality, a good way that shorten Blu-ray ripping time is setting lower output quality when ripping Blu-ray to hard drive. The smaller output video is, the short time it takes to rip Blu-ray to your computer. Again take Pavtube Blu-ray Ripper v3.7 for example; a Blu-ray movie of 20GB will be compressed to 12GB when you set “MKV HD” as output format. When you set the video “Bitrate” to “medium quality” instead of “high quality”, the file size is cut down to 8GB and the ripping time is 1/3 down meanwhile. Learn how to balance video size and quality when ripping Blu-ray movie.
D. Use a faster computer to do Blu-ray ripping.
As I mentioned above, a faster computer rips Blu-ray at faster speed. I believe that movie enthusiasts and people who intend to build a HTPC home network for sharing video contents would probably choose this ultimate solution. One of my friends told me that his newly built HTPC is able to complete the ripping of a 90min Blu-ray in half an hour, and he use 1080p HD MKV format!
Hope this post helps. More Blu-ray ripping solutions can be found at Pavtube Blu-ray Special.
Avid Xpress Pro was a non-linear video editing software aimed at professionals in the TV and movie industry. However, Xpress Pro was discontinued on March 17, 2008, and was no longer for sale after June 30, 2008. If you are using Panasonic AVCCAM cameras or some JVC cameras which record footage in the format of MTS, MOD, or TOD, you may get trouble when importing these files into Avid Xpress Pro for further editing. In that case, you just need use a practical Avid converter to convert MOD, TOD, and MTS files to Avid Xpress Pro compatible file types, like Avid DNxHD (*.mov). The following guide tells how to edit MOD, TOD, and MTS files in Mac Avid Xpress Pro in detailed steps, if you are looking for such a solution, just feel free to check it.
Step 1: Load MOD, TOD, and MTS files to Pavtube Mac Avid converter.
Run Pavtube HD Video converter for Mac as the Mac Avid converter. Click “Add” button to load MOD, TOD, and MTS files shot by Panasonic AVCCAM cameras or JVC cameras. You are allowed to add multiple files to do batch conversion at a time. Meanwhile, if you wanna combine several files into a single file, you can tick off the checkbox “Merge into one file”.
Step 2: Select “Avid DNxHD (*.mov)” as output format for Mac Avid Xpress Pro
Click on the dropdown menu of “Format”, and then follow “QuickTime Movie Format” > “Avid DNxHD (*.mov)”.
Step 3: Set advanced settings
To convert MOD, TOD, and MTS files to Avid Xpress Pro, you are allowed to click “Settings” button to adjust audio and video parameters, including size, bit rate, frame rate, sample rate and audio channel.
Step 4: Convert MOD, TOD, and MTS files to Avid Xpress Pro
Click “Convert button to start converting MOD, TOD, and MTS files to Avid Xpress Pro. When conversion is finished, you can click “Open” button to get the final output files. By then you are ready to edit MOD, TOD, and MTS files in Mac Avid Xpress Pro.tutubebe99 - Thu Jan 20, 2011 6:07 pm Post subject:
The Pavtube Blu-ray Ripper
-All-in-one Blu-ray/DVD ripper, converter, and editor.
-Rip/convert Blu-ray/DVD to AVI, MKV, MPG, and more.
-Remove AACS and BD+ encryptions up to MKB V20 from Blu-ray Discs.
-Guarantee audio and video in sync/3X faster with CUDA acceleration.
-Support using multiple cores to do conversion.
-Support selecting audio tracks and subtitles, including forced subs.
-Support “Full Disc Copy” to remain Blu-ray/DVD originals.
PDF to IMAGE Converter
PDF to IMAGE Converter with reliable quality and humanized design is your ideal helper, which can protect U from having troubles in converting pdf to image! Unimaginable functions will not let U down forever!
Powerful evidence: using PDF to IMAGE Converter, U can convert pdf to all kinds of image formats: JPEG, PNG, GIF, BMP, PCX, TGA, TIFF. U can also adjust the color, quailty, resolution, page of the files converted!
This screen of PDF to Image Converter has showed its great advantage. As soon as lauching PDF to Image Converter, you will find it is so useful!
Helpful steps of converting PDF to Image:
You need to downlowd and install PDF to Image Converter on your computer!
You can add or delete your files and folder by cicking these buttons:
, you can also click the "File" button to finish these steps.
Then you can adjust your files by settting the following regions,
If U are satisfied with the results above by previewing, you can click the "Convert" button to convert PDF to Image! Remember to set destination folder by clicking the "Browse" button.
All steps are finished, I think that PDF to Image Converter has dealed with your problems! So, you have owned best assisstant! Congratulation!
PDF to Image Converter----Your Best PDF to Image Converter
, you can also click the "File" button to finish these steps.
