Forum:	iPhone Accessories
Téma:	MXF Video Converter - How to convert mxf file
-----------------------------------------------------

snowgirl:
Currently, MXF is fairly effective at the interchange of D10 (IMX) material, mainly because of the success of the Sony eVTR and Sony's eVTR RDD to SMPTE. Workflows combining the eVTR, Avid NLE systems, and broadcast servers using MXF in coordination with AAF are now possible.
But there are also many problems about MXF file, many devices can't support this format file. So we need MXF Converter to convert mxf file to other format, then import MXF file conversion which the video format is supported by devices.
With AVCHD Video Converter, we can convert mxf file to friendly video formats just like avi, mpg, wmv, mp4, mov, flv, asf, rm so that you can easily work on them. We also can use the MXF File Converter to convert mxf file to iPod/iPhone/iTune/PSP/Apple TV so that we can watch our favorite mxf conversion file everywhere. It is just a simple and powerful MXF File Converter.
How to convert mxf file with mxf file converter?
Step 1: Add mxf video files
Free download, install and run AVCHD Video Converter, then click &quot;Add File&quot; button to select your desired format that need to be converted from the &quot;file type&quot; list in the pop-up window.
 
Step 2: Choose output format
Choose the file, click &quot;Profile&quot; drop-down button to choose the format you need, then click &quot;Browse&quot; button to choose destination folder for saving output files.
 
Tip:
Trim: You will be able to select a certain length of video/audio in the clip to convert, so that you can get whatever part you want and won't be limited to convert the whole clip.
Crop: If you find the black sides and subtitle in the frame annoying, you can remove them using Crop.
Effecf: You can set Brightness, Contrast and Saturation to tune the rendering effect. Or you can go to Special effect to choose Old Film, Horizontal, vertical, etc. simple fun and interesting.
 
Step 3: Convert
When you get ready to convert the added mxf videos, Click the &quot;Convert&quot; button to start conversion and then you can just go out for a walk or take a nap, and the conversion may have been finished when you come back.

mxf file converter|mxf video converter|converter mxf file|mxf file conversion|mxf converter|converting mxf file|mxf conversion

snowgirl:
Import vob to imovie for editing is not as diffcult as you think now. Many mac users happened that could't import vob to imovie directly by themseves. The reason that can't import vob to imovie is imove just support mp4, mpeg2, dv, move but not vob.
If you want to import vob to imovie the first thing you should do is to convert vob to imovie support format files like mp4, then import vob to imovie. So you need the VOB to iMovie Converter to help you to convert/import vob to imovie '08/'09 right now.
With the best vob to imovie converter, just some simple steps you will convert vob to imovie mp4, then import vob to imovie and edit with imovie. The imovie import vob converter also can convert other popular format videos to imovie like MPEG, WMV, H.264/AVC, MKV, RM, MOV, XviD, 3GP, so perfect!

candylost:
&quot;I recently got a Sony Cybershot &amp; a new MacBook Pro.When I connect my camera, my photos import, but the videos don't come with it.What do I do?Videos import with the photos to my older mac, so I do not understand.Please help!!!&quot;

jasonfrank:
Top 5 iMovie Alternatives for 1080p AVCHD/AVI/MKV/MXF video editing

The Mac has long been the homestead for effective and easy video editing, graphic design, and video compressing for many professionals and novices alike. Maybe you want to throw together a few video clips. Maybe you have more time and want to fine-tune every edit. Or maybe you just want to flip through clips the way you flip through album covers in iTunes. To accomplish these tasks, you don’t really need invest on professional video editors like Final Cut Pro and Avid Studio. If you are at all interested in getting your creative juices flowing, video wise, iMovie works fine for novices. If, however, iMovie can’t import or handle your video in the way you want, there are lots of other smaller and still great apps available. Want to get your hands on some decent iMovie alternatives for satisfying all your video editing needs? Well, we’ve come up Top 5 iMovie alternatives that will take care of your tweaking requirements on Mac. 
 
1. Media Magician for Mac
 
Media Magician for Mac is a user-friendly package for AVCHD transferring, compressing and entry-level video editing. It’s very handy to back up AVCHD (and other HD video recordings) to Mac HDD and export their own short film with just some simple editing, which is quite intuitive- any video from the media library can be dragged and dropped to the timeline where you cut video by frame-accurate, trash undesired frames, join multiple AVCHD clips together, set video effect including 3D Red-Blue/Red-Cyan effect, mute (or articulate) audio, rotate video, take snapshot, etc. 
 
 
What set Media Magician apart from other video editing software is its massive import and export formats. Comparing with iMovie, this app accepts much more formats: MP4, MOV, M4V, AVI, MKV, MTS, M2TS, TOD, MOD, MOV, MXF, VOB, ect. Any video can be thrown in it for editing. In terms of export format, it’s also impressive, there are Lossless M2TS/MKV output is intended for seamless merge of multiple AVCHD clips; under Editor tab there are intermediate codecs such as Apple Intermediate codec, ProRes 422, Avid DNxHD so that professionals can further edit their artwork natively in Final Cut Pro, Avid, Adobe AE, etc; the Online tab offers a time-saving way for users to upload their work to YouTube; also there's a Device tab under which you can find hundreds of presets for almost all the devices that play video, from tablets and smartphones to HD media players and video game console. This really makes sense for average users who has no idea what codecs are or what format to use- just find your device in the list and choose the preset. 
 
Price: $45
 
Requires: Mac OS X Leopard (10.5), Snow Leopard (10.6), Lion (10.7), and Mountain Lion (10.8)
 
2. Adobe Premiere Elements
 
Adobe Premiere Elements 10 is the newest update to Adobe’s popular consumer video editing application. Premiere Elements is inexpensive, well designed, and easy to learn. Premiere Elements has both a storyboard and a more traditional timeline view. You can polish, add effects and export to YouTube, HD Video or to DVD.
 
 
Premiere Elements 10 also has the unique capability to export to Blu-Ray, although the Mac has yet to gain Blu-Ray burning capability. You can also keyframe by keyframe edit effects and transitions.
 
Price: $79.99
 
Requires: Mac OS X 10.6 or later
 
3. Mac iMedia Converter
 
You may want to edit a file or post a video file and that file is not compatible with your system. When you run across this problem you need to convert the file. The easiest way is to use a file converter like iMedia Converter. 
 
 
iMedia Converter is easy to use and accepts many file formats. It also includes batch convert functionality. As an added value, iMedia Converter includes direct conversion and ripping from a Blu-ray disc or DVD!
 
Price: $52
 
Requires: Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, OS X 10.8 Mountain Lion
 
4. Final Cut Pro X
 
Sometimes you just need a real pro tool for the job. When those times call, answer with Final Cut Pro X! Apple upped in 2011 the ante by releasing Final Cut Pro X for only $299.99. FCPX has gained speed improvements, ease of use improvements, and many of iMovie’s looks and features. Although I still use FCP 8, FCPX is awesome for many projects and will come in handy if you get real serious.
 
 
Final Cut Pro X has many features to covet. The best includes magnetic timeline, built-in audio editor, a new 64bit architecture, faster rendering, built in effects, and a simpler to use color grading effect. Being that the price is hundreds of dollars lower the FCStudio, I could not recommend it enough.
 
Price: $299.99
 
Requires: Mac OS X 10.6.8 or later
 
5. Aurora3DAnimation
 
If you want to make your own 3D text or logo animation, normally you would have to use complex 3D graphics software and animate it yourself in After Effects. This is a tedious process that requires a huge skill set and thousands of dollars. With Aurora3DAnimation, you can easily create and animate 3D text and logos the exact way you want them without learning new skills. It could not be any easier!
 
 
Aurora3DAnimation offers beautifully designed templates, freehand control, light control, a built in graphic library, and excellent export capabilities. At only $49.99 you are not only saving hundreds of dollars, but many headaches!
 
Price: $49.99
 
Requires: Mac OS X 10.6 or later; 64-bit processor
 
Hope you love this roundup! Can you help me to share it for helping more guys? Thanks.

JasonRain:
Top 5 iMovie Alternatives for 1080p AVCHD/AVI/MKV/MXF video editing 
_________________
WoW gold|Diablo 3 Gold|Runescape Gold|GW2 Gold

conveyor01:
Despite significant hurdles, such as a national drug war, worldwide Mesh Belt recession, and a decline in oil production investments in Mexico have continued to rise. In 2007 Mexico was only ranked 19th as an appealing foreign Sprocket Wheel market to invest in, yet by 2010 it had sky rocketed to an impressive number 8.
Universal ball bearing series
Mexico indeed has it's issues. However, the country still attracts Roller Chains commerce from American companies seeking to lower operating costs Sushi Chains. Additionally, as the world economy improves more investments is expected. The United States is the leader when it comes to making investments in Mexico, having increased by 400% over the last fifteen years.

michellewhibley:
How to Create Flipbook Free?
Professional Flipbook Creator for Mac and Flip Maker for Mac can help you convert pdf to flipbook with best quality and fast speed on Mac and Windows. It can convert common PDF files to digital online or offline brochure, product catalog, magazine, comic with fantastic flash page-flipping effect. Convert PDF to flash flipbook with *html and *.app for interactive flash, YouTube video, web hyperlink, page links, email links, JavaScript effects, photo slideshows, etc.
There are also some free Flipbook Maker, you can have a look and try. But I still insist the professional one, easy to use and powerful.
1 Issuu
Overview of Issuu: it’s an easy to use online free tool that can do the conversion PDF to flash in a short time. And it’s also a commonly used freeware among PDF users. And you can upload your converted ebook to Facebook, blog or other website.
Easy tutorial: You only need to import your PDF files to Issuu from your computer, determine a title and description for your flipbook, and then input your email address, and click Next button to start conversion. Please don’t forget to check your email box for the link of converted flipping book. URL: bit.ly/wtXPGG.
2. Pagegangster
Another swift and easy online method to publish your PDF files as flipping magazine, brochure or ebook. The free tool allows you to combine the realistic simplicity of reading a book with modern multimedia technologies. An email is needed, and then you can customize your publications.
Easy tutorial: firstly, click Browse button to import PDF files. Step2: input your valid email and set the target language. Step3: do conversion. Last but not most, you need to enter email to edit and personalize the output publications. URL:bit.ly/yUHBuU.

vivian78:
iMovie &amp; M2T files: How do I import .m2t to iMovie 8? 
 
Summary: &quot;How do I import HD .m2t files into iMovie 8&quot; has become a hot topic for Mac users. To successfully import HD M2T into iMovie 8, the following guide will tell you how to do it step by step... 
 
Quote:
&quot;My problem is this...My wife had some interview videos shot of her family and the files were saved at .M2T. I have been trying to find something that will convert these files into a format that can be used with iMovie 8, so far no luck, they are high def and I don't want to loose any quality. Are there any recommendations, what format should .M2T be converted to so that iMovie can edit them?&quot;
 
[*] Read More: How to import M2T files to FCP 6/7 or FCP X 
 
Why Failed to Import M2T files to iMovie? 
 
[*] Reason 1: MTS, M2T, M2TS videos are only compatible with iMovie which run on a Mac with an Intel-based Core Duo processor or better. 
[*] Reason 2: It is allowed to import individual AVCHD MTS or M2TS directly from the camera, but it is not possible to import single MTS or M2TS files that are on the hard drive unless the file structure from the memory card is in place. 
[*] Reason 3: Due to the wide range of media types, and the different ways manufacturers store video on these media types, not all AVCHD (in mts, m2t, or m2ts) camcorders are compatible with iMovie. 
 
In attempting of importing .M2T to iMovie 8 for smooth editing, you are suggested to transocde .M2T to AIC (Apple Intermediate Codec), the favorite editing codec of iMovie in advance. The Apple Intermediate Codec (AIC) does not use temporal compression, so every frame can be decoded and displayed immediately without first decoding other frames. The drawback of this codec is that it requires much more bandwidth and hard drive storage space. The following section elaborates how to convert HD .M2T to AIC MOV for iMovie 8 editing. To conduct the conversion, you need a handy video encoder. Here we recommend the Pavtube M2T to iMovie Converter for Mac. 
 
Convert .M2T videos to AIC .MOV for iMovie 8 on Mac effortlessly 
 
Step 1. Run the Mac M2T to iMovie Converter, simply drag-and-drop the m2t files need to convert into this Mac HD Video converter. Or you can click either &quot;Add Video&quot; button or &quot;Add from folder&quot; button to load source .m2t files. 
 
 
 
Step 2. Choose configured presets for iMovie. In order to convert M2T to AIC for using in iMovie 8/9/11, simply hit &quot;Format&quot; menu and follow &quot;iMovie and Final Cut Express&quot; &gt; &quot;Apple InterMediate Codec (AIC) (*.mov)&quot;. 
 
 
 
Tip: By clicking &quot;Settings&quot; button, you are able to enter the &quot;Profile Settings&quot; panel to adjust video and audio parameters for your Canon T4i MOV source files, including video size, bit rate, frame rate and more. 
 
 
 
Step 3. Hit the &quot;Convert&quot; button to kick off to M2T files to AIC MOV conversion on Mac. 
 
Step 4. Import converted AIC MOV to iMovie. Launch iMovie 8, and then choose File &gt; Import &gt; Movies to import the converted M2T footage to iMovie for further editing. 
 
[*] iMovie File Importing Steps: How to import video files or projects to iMovie 8/9/11 on Mac? 
 
 
 
About Pavtube MTS/M2TS Converter for Mac 
 
This program is good at encoding AVCHD/MOD/TOD camera shootings to different formats (H.264 MOV/MTS/M2TS/M2T/MKV/AVI/MXF, etc.) for editing on more Mac editing software, i.e. encode M2T to ProRes for FCP, encode M2T to DNxHD MOV for Avid, encode M2T to WMV/MOV/MPG for Premiere Pro, etc...Only need to change the step 2. 
 
Read more iMovie solutions: 
 
[*] Convert AVCHD MTS/M2TS to AIC MOV for iMovie? 
[*] Load Canon Vixia AVCHD MTS to iMovie 
[*] Encode Sony AVCHD MTS/M2TS to AIC MOV for iMovie 
[*] Edit Panasonic MTS files with iMovie 
[*] How to edit Nikon D5200 MOV with iMovie freely 
[*] Import Canon MXF files to iMovie

csluyuan:
Media Magician for Mac is a user-friendly package for AVCHD transferring, compressing and entry-level video editing. It’s very handy to back up AVCHD (and other HD video recordings) to Mac HDD and export their own short film with just some simple editing, which is quite intuitive- any video from the media library can be dragged and dropped to the timeline where you cut video by frame-accurate, trash undesired frames, join multiple AVCHD clips together, set video effect including 3D Red-Blue/Red-Cyan effect, mute (or articulate) audio, rotate video, take snapshot, etc. 

_________________________________________________
Diablo 3 Gold|Aion Kinah|Wow Gold|Guild Wars 2 Gold

ipad001:
Mac M4V Converter - How to convert m4v files to avi/mp4/asf/mpeg/mov/flv/3gp/wmv, etc on Mac?
The M4V Converter Mac is a powerful and professional conversion program designed for Mac users which can convert M4V to all formats you want, with it, you can convert M4V video to all popular formats like AVI, WMV, 3GP, MP4, MOV, iPod, iPhone, Apple TV, MPG, etc for playing on iPod, Zune, iPhone, Apple TV, PSP, Xbox 360, PS3, Archos, iRiver, Creative Zen, PMP, Smart Phone, Pocket PC, PDA, Mobile Phone, etc. Moreover, it can also support convert M4V to many kinds of audio files which will help you enjoy both video files and audio files on your Mac.
The Mac M4V Converter provide us a user-friendly interface which make it easy to use and let us feel comfortable. Besides, the features like all-in-one, easy-to-use, fast speed and perfect output quality make it popular to all of us. You can convert M4V only with a few clicks and it will convert M4V to the format you want only in several minutes.
As a matter of fact, This M4V Converter also a good editor which help us edit our videos and audios, such as cropping unwanna clips, Trimming video or audio, Merge video, adjust video effect, customize video output settings, etc by the professional M4V Converter Mac software. It will let us to customize our own video or audio at will. 
How to convert m4v on Mac?
Step 1: Load m4v video files to M4V Converter for Mac
Free download, install and run Mac M4V Converter, click &quot;Add&quot; button to add vob files into M4V converter. It support batch conversion.
 
Step 2: Select output format
In the drop-down list next to &quot;format&quot;, select output format.
Step 3: Start convert M4V video files
After all the necessary setting have been done, click &quot;Convert&quot; button to start converting.

Andrewhudson040:
Hi here is the given all the tip's how to convert the mxf file. with helpMXF Video Converter can convert given all the step's of converting file. this is a very helpful to mxf file convert for mac computer and apple phones format files can convert easy way. thanks for sharing nice converter software for mac and apple phone.

JerryEdison001:
MXF(Material Exchange Format) is now a popular video and audio format used by many top-end camcorders. Maybe you just know it is a HD video format, but do you know what the MXF is and with what standard the MXF is compressed? This article will give you brief answers about MXF questions.
What is MXF
“MXF is a ‘container’ or ‘wrapper’ format which supports a number of different streams of coded ‘essence’, encoded with any of a variety of codecs, together with a metadata wrapper which describes the material contained within the MXF file.” ,from Wikipedia.
MXF packs together video, audio, and programme data, such as text – together termed essence – along with metadata and places them into a wrapper. It’s body is stream based and carries the essence as well as some of the metadata. It holds a sequence of video frames, each filled with involved audio, and data essence, plus frame-based metadata. The latter typically comprises timecode and file format information for each of the video frames. This arrangement is also called an interleaved media file.
MXF in use
MXF is mainly used in movie and TV production, edition, presentation and save.MXF was developed to carry a subset of the Advanced Authoring Format (AAF) data model, under a policy known as the Zero Divergence Directive (ZDD). This theoretically enables MXF/AAF workflows between non-linear editing (NLE) systems using AAF and cameras, servers, and other devices using MXF.
Till now, there have no format can meet all requirements of broadcast production, while, MXF is designed to meet most of those requirements in the time being and in the future.
Can MXF replace all the current media formats
The answer is definitely no. It needs quite a long time for MXF to replace the current video and audio formats for there are quite a lot of video and audio files are saved as MPEG, AVI,GXF and even Quicktime formats, to convert so many files to MXF needs great efforts. But one trend is certain, there will be more and more devices supporting MXF in the future.
Typical Camcorders using MXF
Till now, there have been many MXF camcorders in the market, the typical examples are below:
Can XF series: Canon XF100, XF105, XF300, XF305 and Canon C300;
Panasonic: Panonsonic P2, HVX200, HPX170;
Sony XDCAM camcorders: Sony XDCAM, PDM700, PDM-F800. PMW100
Software supporting MXF
Final Cut Pro 5.0 from Apple Inc. can perfect import MXF. But it is a pity that iMovie cannot support MXF natively, you need to convert MXF to iMovie with UFUSoft MXF Converter for Mac before edit the files in iMovie. Edit MXF in Winows is also easy with UFUSoft MXF Converter as the best MXF to Windows Movie Maker converter.
 
Tags: Can MXF replace all the current media formats, convert canon xf mxf to mov imovie, edit sony xdcam mxf in mov imovie, import panasonic p2 mxf to mov imovie, MXF in use, mxf to imovie, Software supporting MXF, Typical Camcorders using MXF, What is MXF

vivian78:
PMW-200 Workflow Mac-Import Sony PMW-200 MXF to PPro CS5
 
Good news! Summer holidays are coming! It's a time for taking a break from work and relaxing. And now you can enjoy your colorful summer time with good featured products at &quot;Pavtube Summer Holiday Sale&quot;. At this Summer Sales Special Offer, Pavtube Studio is offerring free or up to 50% off on excellent video tools ! Go ahead and click the link to get your coupon. Expires on August 31, 2013. Time-Limitted! Never miss!!! 
 
Description: This article aims to help users transcode Sony PMW-200 MXF to compatible format for editing in Adobe Premiere Pro CS5; with this easy-to-use Sony MXF Converter, you can easily convert your MXF footage for various formats for NLE programs. 
 
&quot;Hi, I want to edit some 1080/50i MXF videos from a Sony PMW-200 in Adobe Premiere Pro CS5, but CS5 does like to work with MXF videos. Do you have any ideas of how to get it working?&quot; 
 
The PMW-200 is one of the high-end XDCAM HD422 Memory Handy camcorder from Sony, which supports the 50 Mbps MPEG HD422 codec and MXF recording. With its three 1/2-inch Full HD Exmor CMOS sensors (1920x1280), the PMW-200 is able to shoot at a multitude of frame rates at full 1920 x 1080 including 23.98p, 25p, 29.97p, 50i, 60i and at 720p it can record at 50p and 60p, which could meet requirements of most users. With a PMW-200, you can shoot both HD and SD videos with extraordinary quality, and the footage can reach 50 Mbps MPEG HD422 as MXF files. 
 
However the MXF files are not support by many NLE programs on Mac natively; hereby if you want to edit them in Adobe CS5, you’d better to convert Sony PMW-200 MXF footage to AVC encoded mov files for that’s the most compatible format for Premiere Pro CS5. Come and meet this Pavtube Sony XDCAM MXF Converter, which is capable of converting Sony MXF footage to various video formats on mac. 
 
How to convert Sony PMW-200 1080 50i MXF to Adobe Premiere Pro CS5 on Mac 
 
Step 1. Connect your Sony PMW-100 to mac and keep it on, or use a card reader to transfer your footage to mac. Get this Sony MXF to Adobe Converter installed, click top left two icons to load individual videos or the entire folder correspondingly. 
 
 
 
Step 2. Choose best format for editing in Adobe CS5. 
 
Click the drop-down list besides Format, choose Adobe Premiere&gt;MOV(AVC)(*.mov) as the most compatible format as well as best video quality for CS5. 
 
 
 
Step 3. Adjust output video settings including video size, codec, bitrate, frame rate by clicking Settings, all according to your needs. 
 
 
 
Step 4. Click the big red circle to start conversion. Wait for a while, you can get the fresh hot converted video which is compatible with Adobe Premiere Pro CS5. 
 
Tips: 
 
1. Click here to learn: How to import Media Files to Premiere Pro on Mac. 
 
2. Refer to here to learn how to work with different model of Sony cameras. 
 
Other realted guides for you: 
 
Working with Sony XDCAM IMX media in FCP, Avid, iMovie, Premiere Pro 
How to import XDCAM MXF/IMX files into After Effects CS4/CS5/CS6 
Convert Sony XDCAM files to iMovie for editing with AIC codec 
Edit Sony XDCAM MXF media in Sony Movie Studio Platinum Suite 12 
Import Sony PMW-320 MXF to Avid Media Composer 
Get Sony XDCAM-EX MP4 file to FCP 
Ingest Sony XDCAM MXF to iMovie 
Transfer Sony XDCAM footage to QuickTime 
Trancode PMW F55 4K XAVC to FCP 7 
 
Never miss to get 50% off Media Magician(win/mac), 50% off DVD Creator for win and mac, 20% off Video Converter Ultimate and 20% off iMedia Converter for Mac,etc at Pavtube Summer Holiday Promotion Code! 
 
 
Source: Enable Sony PMW-200 50Mb/s MXF to work with Premiere Pro CS5

gergerg5:
Great softs for download and any others,
can mail to mialto@list.ruNew Software everyday Update,Anything you need,You can also check here: ctrl +f 
http://ddgr2014.blogbaker.com/

Kristall v4.1 
Lift.Designer.v5.2.Premium.Suite
MAGNA_FEMFAT_V4.6B
MEMS_FOR_COMSOL_FEMLAB_V3.1 
META Post v3.3.1
MOSEK.Optimization.Tools.v5.0.105
NE_NASTRAN_V8.3
Nlogit 3
PAFEC-FE.V8.8
PCI9.0
PCI.GEOMATICA.V10.0
Pipecad.PIPEsketch_v1.2.0.for.MicroStation
Pixoneer.PG-STEAMER.RTP.v4.1
PilotLogic.GaiaCAD.v2.000
PKPM2005.11.01
PKPM2004(2004.8.13)
PKPM2003.03.04
Polymath6.0
RotorInsa.v3.4.2
RAMINT.RAM.ADVANSE.V5.1.Multilanguage 2D/3D 
RAMINT RAM Advanse 2D &amp; 3D FEA v5.1
RDV.SYSTEMS.RAPID.DESIGN.VISUALIZATION.V2007
Rib.Construction.Suite.v12.3.176
SCHOUENBERG.CALCMASTER.V6.1
Sigma.Design.ARRIS.v9.2
Sigma.Design.BuildersCAD.v9.1
STRUCTURAL_MECHANICS_FOR_COMSOL_FEMLAB_V3.1 
SummitSoft.Business.Cards.Plus.2004 
SummitSoft.Label.Designer.Deluxe.2004 
TechnoStar.Venus-Pre.3.0 
TEAM_EFA_Genesis2000
Teklynx.LabelView.Gold.v8.10.06
Thomas.Maienschein.pkMath.v06.19.07
TOSCA V5.0
TOTAL 3D HOME DELUXE v4.0 
TraCFoil v3.1.20 
Uniplot.v5.5
vanderlaats Genesis v6.0 
Vanderlaats Genesis 2000
Visionics.EDWinXP.v1.70
Wavemetrics.IGOR.Pro.v6.0.3
X-Plane v7.50 
NeuroDimension.TradingSolutions.v3.1.051209
NeuroSolutions.v5.07
Sniffer Pro v4.70.530 
BrainVoyager QX v1.7.9
Calcusyn.v2.0 
Cytel.East.v5.0
Dnastar.Lasergene.v7.1
FieldAlign v1.0.2 
FieldTemplater v2.0.1 
Merge.eFilm.Workstation.v2.1.2
MestREC.v4.9.9.9
Mimics 8.1
Chris.Marriott's.SkyMap.Pro.10 
WYSIWYG 1.14 
NEON2005.v3.6 
AdLab.Advanced.EE.Lab.v2.5
ArtsAcoustic.Reverb.VST.v1.1.1.2
CAAD 4.0 
LinearX.LEAP.v5.2.350 
LoudSpeaker.Lab.v3.1.2
Pinguin Audio Meter 2.2
SIA.SmaartLive.v5.4.0.0
Simpie Feedback Trainer v2.1
Sono.Scope.v2.8 
SpectraLAB v4.32.17
SpectraRTA 132.15 
Steinberg.WaveLab.v5.01b
True.Audio.TrueRTA.Level.4.v3.2
Dyno.DataMite.Analyzer.v2.0.A042
Engine.Analyzer.Pro.v3.3
Fuel Economy Calculator v1.1 B.001
CodeWarrior HC08 v3.0
CVAVR v1.24.1e 
FastAVR v4.0 
WaveStar.v2.6 
EMSight v1.54 
EWARM-EV v3.40A 
FAISYN v2.2 
Furret.PCB.v2.4 
Gc-powerstion v2.2.2
Genesis Frontline v7.1 PCB Designer 
HDL Turbo Writer 6.0e 
Hamic.v2.0.
IPC7351 LP Eval v4.20 
IX1D.v3.35
LAVENIR v2001
UC Gui v3.26 
Virtio VPAI 2.0 Platform 
ParCAM v8.0c 
PCBM LP Provisional v7.02
PowerLogic v1.1 
Pioneer.Hill.Software.SpectraPLUS.v5.0 
MyCAD MyAnal v6.3 
MyCAD.MyLogic.Station v5.1 
MyCAD.MyVHDL.v5.1 
CSOFT_RASTERDESK_PRO_V7.5.879
CURIOUS.LABS.POSER.V6.0
Cult3D Designer v5.3.0.117
CutMaster.2D.Pro.v1.3.2.2
Cycletimer.v1.1.2
Cypress.Microsystems.PSoC.Designer.v4.3.1884
Data.Becker.3D.Apartment.and.Condo.Designer.v3.0
Dataface.MODView.v3.5
DELUO_ROUTIS_V2004
Deneba CAD v2.0.2
DInsight.Studio.v1.2.2214
DipTrace.v1.0
DNC.Precision.v2.0.1.7
Dolphin Smashlog.v5.0
Dolphins.Software.Volts.v4.01
DomusCAD v11.073
Dosch.3D.Packaging.Design-MeltIso
Dosch.Design.3D.Furniture-Utopia
Dosch.3D.Engineered.Structures 2CD
Draft.Survey.Pro.v1.0
DWGEDITOR.V2006.SP4
Dyadem.FMEA-Pro.v5.5.0.37
DynaSCAPE.Professional.v3.02 
E-Tools.E-Studio.Pro.v4.42.029a
Ecotect.v5.50.MERRY.XMAS 
ECS CAD Standalone v4.00 
EDIT CNC.V3.0
EIBA.ETS3.v3.0d
Eovia.Hexagon.v2.0
ERWIN.V4.0.SP2
ESKER_PERSONA_V4.4
ESKER_SMARTERM_3270_5250_V10
Esker.SmarTerm.Essential.v11.0.1
Esker.SmarTerm.3270.5250.v11.0.1
Esker.SmarTerm.Office.v11.0.1
ETRUST.OCS.PRO.V2.0.SP1
ETU.Heizlast.EN.12831.v4.0.4.1
Eurosystems_EurocutDesign_6.1.06 
Eurosystems_EuroVECTOR_2_v6.1.06 
EXCALIBUR_2003_V607_DATECODE_20040607 
Extreme.Dnc.V4.9.8
EYEWIRE.MOTION.LIGHTSPEED2CD
EYEWIRE.MOTION.SYNERGY.SERIES.ENTERTAINMENT2CD
FabriCAD.3.0 
Synplicity.Amplify.v3.7.1
Synplicity.Synplify.Pro.v8.1
synplicity 200906sp1 with crack
Synopsys Certify vG-2012.09
Synplify Identify vG-2012.09 win&amp;linux&amp;2011
Synopsys.Synplify.FPGA.and.identify.vE-2010.09
Synplicity SA3.0.4 win/linux
Synplicity_Synplify_Premier_With_DP_V9.20
can mail to mialto@list.ru

ipad001:
Canon series camcorder is very popular around the world, and it is one of the most famous camera brands. The XF300 Professional Camcorder represents Canon's entry into professional solid state video acquisition. It takes advantage of the latest HD technology to record full HD video to affordable Compact Flash cards. The Canon XF300 utilizes file-based MPEG-2 compression with an MXF file wrapper. So the Canon XF300 generates MXF files.
People likes watch videos with QuickTime on Mac, but the QuickTime doesn't accept MXF videos. Then trouble's coming, we can't play Canon XF300 MXF files with QuickTime on Mac. That is really boring, is there any way make it possible to play Canon XF300 MXF with QuickTime? The answer is very simple, what we should do is just convert Canon XF300 MXF files to MOV format which is commonly compatible with QuickTime.
MOV is a popular video format on Mac, so it is a good choice to convert to. Then the question is choosing what MXF to QuickTime MOV Converter on Mac. Here I advise you to adopt the professional Mac Canon XF300 MXF to QuickTime MOV Converter, it is just designed for such an situation. With the help of Canon XF300 MXF to QuickTime MOV Converter you can convert MXF to MOV in a very short time, and the original video quality can be preserved perfectly. Additionally, the Mac Canon XF300 MXF to QuickTime MOV Converter is very easy to use, you just need to click mouse few times you can finish all converting works.
http://www.anymediaeditor.com/convert-mxf/canon-xf300-mxf-to-quicktime-mov.php

Step by step guide to help you convert Canon XF300 mxf file to QuickTime .mov
Step 1:Add mxf file into Mac Canon XF300 MXF to Mov Converter
Install and run Mac Canon XF300 MXF to Mov Converter, select the mxf files and add them into MXF to Mov Converter for Mac.
[img]src=http://www.anymediaeditor.com/image/convert-mxf-on-mac.jpg[/img]
Step 2:Set Output format: .mov
Set output format that you need, here choose QuickTime .mov.
Step 3:Start Conversion
Click the &quot;Convert&quot; button to convert mxf file to QuickTime .mov, just a few minutes, you can finish the conversion.
http://www.anymediaeditor.com/convert-mxf/canon-xf300-mxf-to-quicktime-mov.php

HaileyLi:
Get 20% off Blu-ray/DVD/Video Converter for Galaxy Note 3 | Last 5 Days!
Description: A step-by-step guide to show how to remove Blu-ray/DVD/DRM protection and watch Blu-ray/DVD/Digital Copy/iTunes movies on Galaxy Note 3, how to play MKV, AVI, VOB, Tivo, WMV, MTS, MXF, MOV, TOD, MOD, 3GP, FLV, F4V, M4V, etc. Videos on Galaxy Note 3 with best video quality.
 
Source: http://best-tablet-converter.com/2013/09/24/transfer-blu-ray-dvd-video-to-galaxy-note-3/
 
The Galaxy Note 3 will be releasing worldwide on September 25th. According to news from Samsung on Sept, 4th, the new Galaxy Note3 is bringing some big features to the market, and one such feature is 4K Ultra HD video recording capability, which will be featured on select models upon release of the Note 3.
 
The 4K Ultra HD video standard refers to a display resolution that has approximately 4,000 horizontal pixels. With this technique, the Samsung Galaxy Note 3 would have a crystal clear resolution of 3840 x 2160 (2160p) or 8.3-megapixels, and would bring the coveted 4K TV viewing experience to a handset.
 
In another word, Samsung Galaxy Note III is a clear and unequivocal upgrade compared with its predecessor. 
 
Though it would be fun to watch movies on the hybrid phone, Galaxy Note III only plays its preferred video stuff. MPEG-4 and H.264 are always the most compatible formats with Samsung Galaxy series.
 
 
What we need?
 
To transfer Blu-ray/DVD to Galaxy Note III, the first step is to remove commercial Blu-ray discs and DVDs protection from film studio, and then do the conversion. After several trials, we recommended this Galaxy Note 3 Video Converter Ultimate which is powerful in quick decrypting the protected discs within a few clicks. Also it's capable of converting BD/DVD discs and various videos to 1080p/720p MP4 for Galaxy Note 3.
 
Learn More: Top 5 Best Video Converter Ultimate Review
 
FYI: its Mac version is renamed as iMedia Converter for Mac.
 
(For Mac OS X 10.5 Leopard users: download the .dmg file)
How to convert Blu-ray discs, DVDs and 1080p videos to Galaxy Note 3 optimized video format?
 
Guide Steps:
 
Step 1. Load Media Files to Galaxy Note 3 Video Converter.
Install and run the Blu-Ray/DVD/Video to Galaxy Note 3 Converter, click the top left “Load files” to load Blu-ray/DVD from disc drive, folder or ISO/IFO; or load your video files like MKV, AVI, VOB, Tivo, WMV, MTS, MXF, MOV, TOD, MOD, 3GP, FLV, F4V, M4V, etc. by clicking the second icon “Add video”.
 
Note that your computer needs an external BD drive for loading Blu-ray/DVD movie. 
 
 
Step 2. Set output format for Galaxy Note 3.
 
To play movies and videos on Galaxy Note 3, you need to set a compatible format for the smartphone. This Galaxy Note 3 Movie/Video Converter provides presets for Galaxy Note series. You can click on the pull down menu of “Format” to choose “Samsung -&gt; Samsung Galaxy Note(*.mp4)” for conversion.
 
Step 3. Customize video specs. (Optional)
 
For people who want to further customizing output video size and quality, you can click “Settings” on the bottom to enter Profile Settings Window, and customize video size, frame rate, bitrate, codec and sample rate(Hz). In general, the higher bit rate, the bigger output file size.
 
According to video testing result, for watching videos on the Android tablet, 720p with 1500~2500kbps is just all right.
 
Step 4. Convert Blu-ray/DVD movies and Various Videos to Galaxy Note 3.
 
Now click &quot;Convert&quot; button to start converting Blu-ray/DVD/Video to Galaxy Note 3 MP4. When the conversion task is finished, you can click “Open output folder” button to get the videos ready for playback on Galaxy Note 3.
 
Your may want to read:
How to sync the converted video from Mac to Galaxy Note III via Kies?
Transfer video files from PC to Samsung Galaxy Tab with Kies
 
Keep in mind that some of the settings can be tweaked to improve the video quality but it's a balance between quality and size. Using the settings we suggested, a 120-minute Blu-ray encoded to about a 1.3GB MP4 file. 
 
Additional Tips: 
 
1. If you are looking for a powerful all-in-one tool to convert Blu-ray, DVD and 1080p/720p Videos to your Samsung Galaxy Note 3, Galaxy Tab 3 10.1/8.0, Galaxy Tab 2, Galaxy Note 2, Google Nexus 10/7, Kindle Fire HD, Galaxy S3/S4, Motorola DROID Mini, iPhone 5S, iPhone 5C, Xperia Z1, LG G Pad 8.3, Acer Liquid E2/S2, Asus MeMO Pad HD 7&#65292;Moto X, Nook HD, Transformer Prime, etc. simultaneously saving time and effort, the all-in-one Blu-ray Video Converter Ultimate program will be a nice choice for you. You can get 20% off now, Last 5 Days! 
 
Or you can get 30% off Blu-ray Ripper for Windows/Mac to rip Blu-ray/DVD movies to any tablets and phones on Windows/Mac. (Learn more: Top 5 Best Blu-ray Ripper Review and Top 3 Best DVD Ripper Review)
 
2. If you are looking for a powerful DRM Converter tool to convert iTunes Store movies and music, Amazon videos, BD/DVD Digital Copy movies, Blockbuster, BBC iPlayer videos, etc. to Android OS, Apple iOS and Windows 8 RT/Pro tablets/phones support playback formats, Pavtube ChewTune (Top 5 Best DRM Removal Programs Review) will be a nice choice for you. Good news for you: ChewTune just been updated on 17th Sept with some new features:
 
* Supports latest iTunes videos and DRM WMV on Vista/Windows 7/Windows 8.
* Supports latest iTunes videos on XP.
 
Learn more special offer:
 
ByteCopy($42) + Blu-ray Video Converter Ultimate($65) = Only $80, Save $27
ByteCopy for Mac($42) + iMedia Converter for Mac($65) = Only $80, Save $27
Blu-ray Video Converter Ultimate($65) + DVD Creator($35) = Only 65$, Save $35
ChewTune ($29) + Blu-ray Video Converter Ultimate($65) = Only $75, Save $19
ByteCopy($42) + ChewTune($29) = Only $54, Save $17
Blu-ray Ripper($49) + DVD Creator($35) = Only $49, Save $35

HaileyLi:
Best solution of BBD 1080i VC-1 Blu-ray lossless conversion on Windows/Mac
 
Description: A detailed guide to show how to lossless backup VC-1 BBD or encode them to H.264 MKV, so that you can preserve them on NAS or playback on HD media player/home theatre for sharing with family&amp;friends.
 
Q: &quot;Usually I backup DVDs with DVDFab. But recently I got some VC-1 format Blu-rays and wish to back up them in H.264 for playback on home theatre. I have a BIG file server(NAS). So the file size is not an issue. So is there any tool well support VC-1 Blu-rays and backup them without quality loss? Thanks!&quot;
 
It's a great idea to backup Blu-ray collections to H.264 MKV for a long time saving without scratches. For people who have a large NAS server, video quality should be the most important thing. Follow this guide to learn how to lossless backup/encode VC-1 blu-rays to MKV for playback on computer and home theatre.
 
What is VC-1?
 
VC-1 is an evolution of the conventional DCT-based video codec design. Both HD DVD and Blu-ray Disc have adopted VC-1 as a video standard, meaning their video playback devices will be capable of decoding and playing video-content compressed using VC-1. Blu-ray players like XBMC Frodo have problems with VC-1 Blu-rays; so we have to try another way to backup these Blu-rays.
Although there're many programs supporting Blu-ray ripping, many of them do not support converting VC-1 standard Blu-rays. For people who want to backup VC-1 Blu-rays like me, you are suggested to try this Pavtube ByteCopy (Mac Version).
Pavtube ByteCopy is a professional Lossless Blu-ray backup tool which supports normal commercial Blu-rays including those in VC-1 standard. With this program, we can decrypt Blu-rays and lossless backup Blu-rays to MKV format, ortranscode it to compressed H.264 MKV with desires audio–tracks.
Share this page on Facebook to get 20% off any Pavtube programs.
 
More Pavtube specials on Christmas can be found here: http://www.pavtube.com/2013-christmas-specials.html
 
How to lossless backup/encode VC-1 Blu-rays to MKV on PC/Mac
 
Part 1. Run this ByteCopy; load discs
 
Click the top left icon to load Blu-ray/DVD disc, Blu-ray folder/ISO, or DVD folder/IFO/ISO image files.
 
Pavtube ByteCopy will detect the main title and check it by default.
 
 
Part 2. Choose lossless/encode MKV format
 
Click &quot;Format&quot; drop-down list and choose &quot;Multi-track Video&gt;Lossless/encoded Multi-track MKV(*.mkv)&quot;.
 
 
Part 3. Adjust target settings
 
This preset includes two output formats: lossless and encoded MKV. Let's click the &quot;Settings&quot; besides &quot;Format&quot; to choose wanted format.
 
See these screenshots:
 
1. Switch to &quot;Video&quot; tab; check the &quot;Encode&quot; to output compressed H.264 MKV; otherwise you can get lossless MKV files.
 
 
2. Switch to &quot;Audio&quot; tab; select wanted audio tracks.
 
 
Moreover, users can see all the source/target video specs including AC-1, AC3(audio codec), kbps(bitrate), etc. in this window. So we can easily check and adjust the input/output video settings immediately before conversion.
 
Part 4. Start Lossless Conversion
 
Back to the main interface; hit the big red &quot;Convert&quot; to star converting VC-1 Blu-rays to lossless/encoded MKV files. After the conversion, you can hit &quot;Open&quot; or &quot;Open output folder&quot; to quick locate the converted video; now you can playback them on computer or stream to HD media player to share with family and friends.
 
Related Guides:
Convert Blu-ray ISO to 1080p MKV for Mac
Lossless Backup/Copy Blu-ray disc to avoid scratched by children in three ways
Convert Blu-ray M2TS to MOV reserving Multi-track/stream in outputs
Watch Blu-ray movie on any Tablets/Phones/TVs with multi-track video
Play DVD IFO/ISO on iPad Air with multiple audio tracks
Copy Blu-ray movies to Synology NAS with multi-track for playback on Panasonic TV
 
Source: http://mediaconverting.blogspot.com/2013/12/lossless-backup-bbd-1080i-vc1-blu-ray-to-mkv-for-nas.html

HaileyLi:
Blu-ray to Apple TV 3 workflow: Rip Blu-ray to ATV 3 with AC3 5.1 on Mac
Tag: blu-ray to apple tv 3 workflow, stream blu-ray to apple tv 3, sync blu-ray to itunes 11, play blu-ray on apple tv 3 with itunes 11, rip blu-ray for apple tv 3 with ac3 5.1, best blu-ray ripper for mac, ios blu-ray ripper, Apple
 
Summary: This article shows you a brief guide to convert Blu-ray movies to iTunes 11 for streaming to Apple TV 3 with Dolby Digital Copy 5.1 surround sound on Mac with ease.
 
I owned 5 iDevices, and I often use them for entertainment like email, music, video, ebooks. Now I have some Blu-ray collections, to get these Blu-rays played on my Apple TV 3, iPhone 5C, iPad 3 with AC3 5.1 audio. I have used Aiseesoft Blu-ray Ripper for Mac, but my current Blu-Ray Ripper was not good for some disks and 5.1 output formats. I'm looking for the best Blu-ray Ripper for Mac to do 5.1 conversion to my Apple device mainly on my Apple TV 3? Is there any way?
 
As you know, Blu-ray disc or even the decrypted Blu-ray rips can't be supported by Apple TV 3. You may also meet the similar problems as above. So in this tutorial, I will introduce and share an easy way to rip Blu-ray to iTunes format for streaming to Apple TV 3 for full HD enjoyment with AC3 5.1 channel on Mac, 10.9 Mavericks and Mountain Lion included.
 
To get more solutions, view Apple TV 3 Column, iPad 3 Column, and iPhone 5 Column.
 
Free download and install it:
 
Pavtube Blu-ray Ripper for Mac (Review) which can help you convert Blu-ray to iTunes compatible format then sync to ATV 3 for playback without any limitation. I've found the quality to be excellent, and see no difference when compared to playing the discs themselves. The sound can be kept with the original Dolby Digital 5.1 surround sound. For ripping Blu-ray to iTunes for ATV 3 on Windows, please turn to Blu-ray Ripper (Guide: Sync Blu-ray to iTunes with forced subtitles for iPad, iPhone, iPod, Apple TV).
 
Both the two programs are 30% off at Pavtube Christmas Giveaway
 
Now download the program and follow the steps below to transfer your Blu-ray movies to iTunes 11 and Apple TV 3 h.264-compliant videos with AC3 5.1 audio.
 
How to Rip Blu-ray to iTunes 11 for streaming to Apple TV 3 with AC3 5.1 audio?
 
1. Load Blu-ray source.
 
First of all, insert your Blu-ray to Blu-ray drive and keep networked. Now it's time to open the best Blu-ray to Apple TV 3 Converter for Mac and click &quot;Load files&quot; icon to load Blu-ray source.
 
 
2. Choose output format for Apple TV 3.
 
In the dropdown list of Format menu, you can find several Apple TV options for output. This Blu-ray to iTunes Conveter has a number of presets for Apple TV, Apple TV 2, and Apple TV 3rd Generation, to export a Apple TV 3 1080p video with ac3 5.1 pass-through for AV receiver decoding, &quot;Apple TV 3 Dolby Digital Pass-through (*.m4v)&quot; preset is highly recommended.
 
 
3. Convert Blu-ray to iTunes 11/Apple TV 3 video.
 
Click Convert button to rip Blu-ray to iTunes 11 recognized video for playing on Apple TV 3 generation with Dolby Digital 5.1 surround sound pass-through. Afterwards, transfer the Blu-ray to iTunes 11 and import to Apple TV 3 for watching with ease. There you have it! Now it is time to enjoy your favorite Blu-ray movies with Apple TV 3.
 
If you're new to Apple TV, the below guide will help you get started with Apple TV setup: How to set up Apple TV for streaming HD videos with Dolby Digital 5.1 sounds?
 
Read more:
 
Converting MP4 to M4V for Apple TV 3
Re-encoding AVI files from MiniDV cassettes to Apple TV with AC3 5.1 surround sound
Best iOS Video Converter Ultimate for iPad/iPhone/iPod/Apple TV
How to Add Blu-ray ISO files to iPhone 5S &amp; iPhone 5C with iTunes on Mac
Encode Blu-ray to Multi-track MP4 for Apple TV 3 on Mac
Transfer Blu-ray ISO images to iPad Mini 2 on Mac 10.9 Mavericks
How to watch Blu-ray ISO image files on iPad Air
Convert Sony Cybershot DSC-WX300 1080/60i MTS video to Apple TV on Mac
Convert Panasonic shootingsto M4V for Apple TV
 
From: http://open-mobile-share.com/rip-blu-ray-movies-to-apple-tv-3-with-ac3-5-1-audio-on-mac/

snowgirl:
Some Mac users want to import VRO to Final Cut Express to edit their VRO files which from their Panasonic or Sony Camcorder. But they found that they can't import VRO files into Final Cut Express for editing, even open them on Mac.
Import VRO to Final Cut Express, you must convert VRO to FCE supported video formats like MOV, MP4, AVI, DV, etc. So you have to convert VRO to FCE with Mac VRO to FCE Converter.
Mac VRO to Final Cut Express Converter help you convert VRO to FCE on Mac so that you can import VRO to FCE for editing and without quality loss and audio syncing problems. What's more, you can convert VRO to other popular video formats such as 3GP, WMV, FLV, etc on Mac.
Then follow the guide to convert VRO to Final Cut Express on Mac
Step 1: Add VRO files to VRO to FCE Converter for Mac
Click the &quot;Add&quot; button to add VRO videos to the converter which you want to convert.

Step 2: Select &quot;MOV&quot; as the output format
Choose the &quot;MOV&quot; from the drop-down list of profile “Format”. Hit the button “Browse” to select the saving place.
Step 3: Start Converting
After all setting are done, you click the &quot;Convert&quot; button to convert VRO to FCE on Mac.
